{{ /inductor_wurth_tape2_magnetica.jpg?500 }} 

[[/Gapped inductor]] with edge-on conductor winding, for power conversion, the two main pads are for electrical connections, the third pad (at the back) is also soldered down to a PCB, but it is used to assist with mechanical mounting.

Parameters of this inductor (after [[https://www.we-online.com/catalog/datasheet/7443641500.pdf|Wurth Electronic Online, 7443641500, Datasheet]], {accessed 2021-08-26}):
  * [[/inductance]] L = 15 uH (+/- 15%)
  * rated at IR = 30 A max with [[/temperature rise]] of 50 K, or 34.95 A max for 40 K
  * performance current IRP = 34.95 A max for 40 K
  * [[/saturation current]] 22 A (typical) at 10%, IΔL/LI 10% 
  * saturation current 26 A (typical, at 20 °C) at 30%, IΔL/LI 30% 
  * [[/DC resistance]] 2.4 mΩ (typical at 20 °C)
  * DC resistance 2.64 mΩ (max. at 20 °C)
  * [[/self-resonance]] frequency 11 MHz (typical)

<box round 75% #aaffaa>
  inductor_wurth_tape2_magnetica.jpg
{{page>insert/file-sz-cc}}
</box>

{{tag> Tape Edge-on_winding SMT SMD Ferrite Gapped_inductor Enamelled_tape Solder Files}}