file:inductor_wurth_tape2_magnetica_jpg
Gapped inductor with edge-on conductor winding, for power conversion, the two main pads are for electrical connections, the third pad (at the back) is also soldered down to a PCB, but it is used to assist with mechanical mounting.
Parameters of this inductor (after Wurth Electronic Online, 7443641500, Datasheet, {accessed 2021-08-26}):
- inductance L = 15 uH (+/- 15%)
- rated at IR = 30 A max with temperature rise of 50 K, or 34.95 A max for 40 K
- performance current IRP = 34.95 A max for 40 K
- saturation current 22 A (typical) at 10%, IΔL/LI 10%
- saturation current 26 A (typical, at 20 °C) at 30%, IΔL/LI 30%
- DC resistance 2.4 mΩ (typical at 20 °C)
- DC resistance 2.64 mΩ (max. at 20 °C)
- self-resonance frequency 11 MHz (typical)
inductor_wurth_tape2_magnetica.jpg
You are permitted and indeed encouraged to use this image freely, for any legal purpose including commercial, and with any modifications (the permission is hereby given, so there is no need to ask for it explicitly again), but you MUST always give the following credits:
S. Zurek, Encyclopedia Magnetica, CC-BY-4.0
We would appreciate if you let us know of any use: info@e-magnetica.pl
file/inductor_wurth_tape2_magnetica_jpg.txt · Last modified: 2023/06/17 22:19 by 127.0.0.1